全国服务热线:13932271419
网站公告:
诚信换来金招牌 服务赢得天下客...
公司新闻
联系我们
13932271419
地址:
河北安国市石佛镇路景工业园区景旺路8号
邮箱:
632469545@qq.com
电话:
0312-3426976   0312-3421088
手机:
13932271419
公司新闻 company
当前位置:首页 > 新闻中心 > 公司新闻
渣浆泵的流量不稳定怎么办?
添加时间:2020-1-8 16:38:04

渣浆泵流量不巩固

1、水泵流量不足多是吸水管漏气、底阀漏气;进水口梗塞,导致流量不足;

办理方法:搜检吸水管与底阀漏气源,堵住漏气源;?清理进水口处的淤泥或梗塞物;

2、电压过低导致水泵转速低,水泵流量与转速在一定局限内城正比例干系,转速不足直接影响出水量,

办理方法:搜检电源电压。

3、管路漏气或泵体内存有空气,从而导致水泵流量不足;

办理方法:搜检管路漏气源同时排放泵体体内空气。

4、密封环或叶轮磨损过大,叶轮磨损后与原有叶轮标准尺寸不符,导致水泵流量不足;

办理方法:改换密封环和叶轮。

5、底阀入水深度不足,抽水时易吸入空气,导致水泵流量不足。

办理方法:根据泵的吸程来掌握底阀的深度。


The flow of slurry pump is not consolidated


1. The insufficient flow of water pump is mainly due to the air leakage of suction pipe and bottom valve; the water inlet is blocked, resulting in insufficient flow;


Handling method: search and check the air leakage source of suction pipe and bottom valve, block the air leakage source, clean up the sludge or infarct at the water inlet;


2. The low voltage results in the low speed of the water pump, the positive proportion between the flow and the speed of the water pump is limited to a certain extent, and the insufficient speed directly affects the water output,


Handling method: check the power supply voltage.


3. The pipeline leaks air or there is air in the pump body, resulting in insufficient flow of water pump;


Handling method: check the air leakage source of the pipeline and discharge the air in the pump body at the same time.


4. The seal ring or impeller is excessively worn, and the impeller is not in accordance with the original impeller standard size after wear, resulting in insufficient water pump flow;


Handling method: change the sealing ring and impeller.


5. The water inlet depth of the bottom valve is insufficient, so it is easy to inhale air when pumping, resulting in insufficient flow of the water pump.


Handling method: according to the pump suction to master the depth of the bottom valve.